Electric-Powered Infrared Heating

BASE UNIT

PORTABLE UNIT

PEDESTAL UNIT

HOTZONE VERSAHEAT POWER SPOT

Electric or Gas Spot Heaters

 

 

The IR-Lens is an exclusive, unique and patented "heat lens" that is pre-installed on all Aquality Hotzone spot heaters. 

 

The revolutionary design of this IR-Lens captures the majority of the infrared wasted by other heaters on the market and FOCUSES it on a targeted area or zone...thus spot heating it!

 

 As a result, these heaters can:
- increase delivered heat by 300-500% at longer distances
- attain up to a 20 degree increase in target zone temperature
- reduce heating costs by 50% or more

 

ELECTRIC - Base Unit 

[ VHE-200 ] Hotzone 1500W Base Unit, 120V only. - $340.00 :

[ VHE-202 ] Hotzone 1500W Base Unit, 240V only. - $370.00 :

[ VHE-226 ] Hotzone 3000W Base Unit, 120/240V. - $465.00 :

[ VHE-277 ] HotZone 5000W Base Unit, 240V/480V. - $565.00 :

 

 

 

 

ELECTRIC - Portable

[ VHE-221 ] Hotzone 1500W Spot Portable, 120V only. - $425.00 :

[ VHE-223 ] Hotzone 1500W Spot Portable, 240V only. - $465.00 :

[ VHE-266 ] HotZone 3000W Spot Portable, 120/240V. - $555.00 :

[ VHE-297 ] Hotzone 5000W Spot Portable, 240/480V. - $655.00 :

ELECTRIC - Pedestal Unit

[ VHE-242 ] Hotzone 1500W Spot Pedestal, 120V Only - $425.00 :

NATURAL GAS Units

33,000 BTU Power Spot - (equivalent to 9600 Watt electric)
66,000 BTU Power Spot - (equivalent to 19300 Watt electric)

99,000 BTU Power Spot - (equivalent to 29000 Watt electric)

 

[ VHN-200 ] 33,000 BTU Power Spot NG Heater - $825.00 :

[ VHN-201 ] 66,000 BTU Power Spot NG Heater - $1025.00 :

[ VHN-202 ] 99,000 BTU Power Spot NG Heater - $1195.00 :

Hotzone Heater Advantages:

• Available in gas and electric
• No venting required  on gas models
• Does not rely on mechanical systems
• Low noise operation
• Compact and lightweight
• Full heat in three minutes
• Can be mounted farther away from the target - out of the way of people and machines
• IR Lens sends out directional heat: you don't have to heat areas that don't need it.   
• ariable sizes of heating zones or targets.
• The outside of the heater is cool - safe for portable applications
• Wind does not affect radiant heat                           

ALGARVE ELECTRIC INDOOR/OUTDOOR HEATER

Features
•Electric Quartz Heater is UL Listed
•Durable, weatherproof casing
•Safety glass
•Available in white, grey or black casings 

Benefits
•Suitable for indoor and outdoor use
•Radiant, directional heat
•Instant heat within seconds
•Less than 10 cents/hr. to operate
•Attractive casing blends heaters into their environment

Specifications

•15.75" wide x 7" high x 5.75" deep
•Weighs 4.5 lbs.
•Heats approximately 10'x10' area when mounted 8' off the ground
•1200 watt heat source
•Lamp life 1100 hours

FHK200 & 400 Model Portable Infrared Heaters are on Stands  

FHK600 Model Portable Infrared Heaters are on Wheeled Carts

FOSTORIA ELECTRIC PORTABLE INFRARED HEATERS

 

Model	Capacity	Voltage	Size
FHK224-1A FHK248-1A	2.0 KW 2.0 KW	240/1/60 480/1/60	28-1/2" x 12" x 12"
FHK424-1A FHK448-1A	4.5 KW 4.5 KW	240/1/60 480/1/60	48" x 12" x 12"
FHK624-3A FHK648-3A	6.0 KW 6.0 KW	240/3/60 480/3/60	37-3/4" x 19-7/8" x 16"
FHK1324-3A FHK1348-3A	13.5 KW 13.5 KW	240/3/60 480/3/60	58" x 27-1/2" x 19"

222 Series - 3.2 KW

Stainless Steel - $525.00

Brown Powder Coated - $420.00

342 Series - 5 KW

Stainless Steel - $725.00

Brown Powder Coated - $580.00

462 Series - 7.3 KW

Stainless Steel - $890.00

Brown Powder Coated - $725.00

Click Here to Order or to Learn more about MUL-T-MOUNT Series Heaters

MUL-T-MOUNT ELECTRIC 2-LAMP  INFRARED HEATERS 

Overhead infrared heaters for snow & ice control, outdoor spot heating and all indoor heating applications

• UL listed for suspended, totally exposed (outdoor), high-bay (indoor) comfort heating and exterior snow & ice control applications
• UL listed for recessed applications
• Built-in Surface Mounting bracket allows for fixture adjustment up to 45º tilt
• 20 Gauge painted steel or stainless steel housings
• Gold anodized aluminum reflectors & end caps
• 50% higher watt densities for 3-element units
• 2-Lamp wiring, single phase
• Stainless steel models have non-corrosive housing, hardware and brackets; no ferrous metals used in the unit. Durable in harsh atmospheres & outdoor environments
• High temperature lead wires
• Available in five different reflector angles from 30 degrees (narrow angle) to 90 degrees (wide angle) for precise heating of your target area.  Click link below to order or learn more.

 

Click Here to Order or to Learn more about MUL-T-MOUNT Series Heaters.
 Includes Selection Guide and Shopping Cart Order links.

Fan Forced Portable Utility Heater

• Operates on 240v or 208v
• Finned steel tubular heating element
• 10' Air Throw at 262CFM
• Internal Manual Reset Thermal Cut-off
• Temperature control thermostat with range of 35 - 85 degree F 
• 6' long cord set with 20 amp NEMA cord&plug

Heat Wave Portable Electric Salamander in 10KW

 

Factory Pre-Wired with a 10' Cable and Straight Blade Range Plug to use  with Standard Range Outlet.

 

• Safety yellow heater enclosure with safety screens on both air intake and     output openings.

• Long-life finned tubular heating elements • High-limit thermal cutout switch

• Thermostat adjustment 40° to 100° F • Switch for fan only operation

• Magnetic contactor • 10” semi-pneumatic wheels

• Automatic reset • 800 CFM 

DRAWS 42 AMPS @ 240V-1 PH

 

15K UNITS - Achieve UP TO 45º Temp Rise

30K UNITS - Achieve UP TO 80º Temp Rise

Wall/Ceiling Mount Electric Salamander

[ YES-1520-3A ] 15KW Wall/Ceiling Mount Electric Salamander 208V/3PH - 42Amp - $785.00 :

[ YES-1524-1A ] 15KW Wall/Ceiling Mount Electric Salamander 240V/1PH - 63Amp - $785.00 :

[ YES-1524-3E ] 15KW Wall/Ceiling Mount Electric Salamander 240V/3PH - 36Amp - $785.00 :

[ YES-1548-3E ] 15KW Wall/Ceiling Mount Electric Salamander 480V/3PH - 18Amp - $785.00 :

[ YES-3048-3A ] 30KWWall/Ceiling Mount Electric Salamander 480V/3PH - 36Amp - $1455.00 :

 

All "YES" Series units can be either Wall or Ceiling Mounted. 

Mounting Yoke and Bracket Included.

 

• Safety yellow heater enclosure with safety screens on both air intake and output openings.

• Units all designed for direct wire installation

• Long-life finned tubular heating elements
• High-limit thermal cutout switch
• Thermostat adjustment 40° to 100° F
• Switch for fan only operation
• Magnetic contactor
• 10” semi-pneumatic wheels
• Automatic reset
• 800 CFM

 

• 60 degree reflector symmetrical heat pattern

• Quartz tube included

• Aluminum reflector and end caps

• 6' long - 3 wire (14/3) cordset with molded plug

• Two 2' mounting chains and 4 S-hooks included

• Interior or protected outdoor use only

• Chain Mount - horizontal to angled mounting
  - When suspended by one hole on each end, the heater will hang at a 45 degree angle.
  - The heater may be suspended at any angle desired.

• Optional vertical mount bracket VMB-41-SS

Fostoria Quartz Infrared Spot Heaters

Available in 1500, 2000, 3000, and 4000 Watt ratings.

Choose regular or (more expensive) Stainless Steel (SS) housing:

Infrared heating is ideal for overhead "Spot" or "Zone" heating applications. Fostoria quartz infrared heaters have nearly instantaneous heat-up and can provide heat for specific areas within a large, open facility where a forced air heater would require more time and energy to heat.