|
|
|
Gas Powered Infrared Heating
|
|
|
|


Part No.
Model
BTU/Hr. Gas Type
BLACK ENCLOSURE
12001-2
S25 Nat AGA Black 25,000
Natural -$845.00
12202-2 S34 Nat AGA Black
34,000 Natural - $875.00
12003-2 S25 LP AGA Black
25,000 Propane - $845.00
12004-2 S34 LP AGA Black
34,000 Propane - $875.00
12006-2 Mounting Kit - Black
$40.00
STAINLESS STEEL ENCLOSURE
12001-4 S25 Nat AGA SS
25,000 Natural - $955.00
12002-4 S34 Nat AGA SS
34,000 Natural - $1,025.00
12003-4 S25 LP AGA SS
25,000 Propane - $955.00
12004-4 S34 LP AGA SS
34,000 Propane - $1,025.00
12006-4 Mounting Kit - SS $75.00
|
SunPak
S25 and S34 Compact Gas Patio Heaters
Price: SEE BELOW
These attractive
SUNPAK "S" Series of Gas Infrared Heaters will increase
the use and enjoyment of your outdoor dining areas. The warm red
glow of radiant heat attracts people to your outdoor tables on cool
days and evenings when your patio might otherwise be empty. The
streamlined design and stainless steel look blends in well with most
any decor. SUNPAK patio heaters easily mount on outdoor walls, under
ceilings and awnings.
SUNPAK is A.G.A.
design-certified as an unvented infrared heater for outdoor or
indoor installation. All units are equipped with spark ignition and
100% shutoff for safety, economy, and convenience.
SUNPAK's aluminized
steel enclosure and aluminum face grille provides resistance to wind
and rain. A slim body and 0-30 degree angle mounting option on most
models, gives SUNPAK patio heaters the versatility to fit easily
into a wide variety of patio situations.
SUNPAK's radiant
sunshine warms people with quiet, gentle heat. Radiant heat warms
people and objects (like chairs and tables) rather than the air.
SUNPAK patio
heaters are simple to operate, inexpensive to use and easy to
maintain.
Two basic SUNPAK
models are available. The model S25, with an input rating of
25,000 BTUH, is suitable for patios with a medium ceiling
height. The model S34, with an input rating of 34,000 BTUH,
will cover a slightly larger area, but requires a higher
ceiling. In a moderate climate, SUNPAK can be expected to
raise the outdoor comfort level up 10 degrees. The S25 heater
typically covers a 10 foot x 10 foot area. The S34 heater
covers approximately a 12 foot x 12 foot area. Coverage will
vary with ambient temperature, wind chill, mounting height and tilt
angle of the heaters.
SUNPAK's aluminized
or stainless steel enclosure, together with the aluminum face grill,
provides resistance to wind and rain. SUNPAK's slim body
design (8 x 8 x 48 inches) and 0 to 30 degree angle mounting option
on most models, gives SUNPAK the versatility to fit easily into a
wide variety of patio situations. An optional mounting kit
(part no. 12006-#) is available.
FEATURES
INCLUDE:
- Slim Profile
- Decorative
Safety Grille
- Reduced
Clearance Requirements
- Angle Mounting
-- Zero to 30 Degrees
- Ideal for Wind
Protected Areas
- Rain Protected
- 25,000 or 34,000
BTU/Hr. Input
- Natural or
Propane Gas
- Direct Spark
Ignition
- 100% Safety
Shutoff
|
Model
No.
|
Angle
Mount
|
Btu Input
|
Mount
Height
|
Heater
Spacing
|
Area
SqFt
|
BTUH/SqFt
|
Cleanrance to
Combustibles
|
Total Height
|
|
S25
|
0°
|
25,000
|
8
|
8
|
64
|
391
|
8"
|
8' 8"
|
|
S25
|
0°
|
25,000
|
9
|
10
|
100
|
250
|
8"
|
9' 8"
|
|
S25
|
0°
|
25,000
|
10
|
12
|
144
|
174
|
8"
|
10' 8"
|
|
S25
|
30°
|
25,000
|
7*
|
10
|
100
|
250
|
14"
|
8' 2"
|
|
S25
|
30°
|
25,000
|
8
|
12
|
144
|
174
|
14"
|
9' 2"
|
|
S25
|
30°
|
25,000
|
9
|
15
|
225
|
111
|
14"
|
10' 2"
|
|
S34
|
0°
|
34,000
|
9
|
10
|
100
|
340
|
13"
|
10' 1"
|
|
S34
|
0°
|
34,000
|
10
|
12
|
144
|
236
|
13"
|
11' 1"
|
|
S34
|
0°
|
34,000
|
11
|
15
|
225
|
151
|
13"
|
12' 1"
|
|
S34
|
30°
|
34,000
|
8
|
10
|
100
|
340
|
18"
|
9' 6"
|
|
S34
|
30°
|
34,000
|
9
|
12
|
144
|
236
|
18"
|
10' 6"
|
|
S34
|
30°
|
34,000
|
10
|
15
|
225
|
151
|
18"
|
11' 6"
|
|
|
|
|
|
SunGlo
Natural Gas Hanging Patio Heater
Price:
Manual Piezo Ignition - Model#A244 - $795.00
24V.
On/Off Staged Pilot - Model#A244V - $895.00
Electronic Ignition - Model#A244EN - $955.00
The
A244 Hanging Patio Heater is great when you don’t want
to take up valuable floor space and you have high enough
ceiling to accommodate the unit. Since the overall height
of the heater is 41”, at least a 10 to 12 foot ceiling
height would be required for installation. The
"EN" Model is equipped with Electric Ignition
and 24 volt transformer. Once connected to a switchable
electrical supply and natural gas, the unit can be powered
on by a light switch, thermostat, timer, etc.). In windy
conditions, if the burner flame blows out, the “EN”
model automatically re-ignites the burner. With 50,000
BTU’s, you will get approximately 320 sq.ft. of heated
area.
FEATURES
INCLUDE:
- 50,000
BTU/Hr. Rating
- Safety
Shutoff
- Ceiling
Mount Included
- Manual
Piezo, Optional 24V., or Electronic Ignition
- Ideal
for Wind Protected Areas
- 24
Volt Control includes Transformer
- Corrosion
Resistant
- CSA
Certified
|
|
|
|

BASE
UNIT

PORTABLE
UNIT

PEDESTAL
UNIT
|
HOTZONE
POWER SPOT
Gas
or Electric Spot Heaters
Price:
NATURAL
GAS -
33,000
BTU Power Spot- $795.00
66,000 BTU Power Spot - $995.00
99,000
BTU Power Spot - $1,150.00
ELECTRIC
-
1500
Watt Base Unit 120V. - $300.00
1500 Watt Base Unit 240V. - $339.00
1500
Watt Spot PORTABLE - $365.00
1500
Watt Spot PORTABLE 240V. - $399.00
1500
Watt Spot PEDESTAL 120V. Only - $395.00
3000
Watt Base Unit 120V./240V. - $415.00
3000
Watt Spot PORTABLE 120V. / 240V. - $495.00
5000
Watt Base Unit 240V./480V. - $500.00
5000
Watt Spot PORTABLE 240V./480V. - $595.00
The
IR-Lens is an exclusive, unique and patented "lens" that
is fitted on all Aquality heaters. The revolutionary design of the
IR-Lens captures the majority of the infrared wasted by ALL other
heaters on the market and FOCUSES it on a targeted area or
zone...thus spot heating it! As a result, these heaters can:
-increase delivered heat by 300-500%
-attain a 20 degree increase in zone temperature
-reduce heating costs by 50% or more
Advantages:
Available in gas and electric
No venting required (gas models)
Does not rely on mechanical systems
Low noise operation
Variable sizes of heating zones or targets
Compact and lightweight
Full heat in three minutes
Can be mounted farther away from the target - out of the way of
people and machines
Creates sharp edges between heat and no heat - you don't have to
heat areas that don't need it.
The outside of the heater is cool - safe for portable applications
Wind does not affect radiant heat
|
|
|
|




|
High
Intensity Gas Infra-Red Ceramic Heater (1-4 Burner)
Price:
Call for Pricing Information
FEATURES:
-
Factory
pre-wired, pre-piped and tested
-
Operate
on natural or propane gas
-
Flexible
inputs from 30,000 to 200,000 BTUH
-
Instant
ON, Instant OFF operation
-
Reach
full intensity temperature within 30 seconds
-
No
need for direct venting
-
100%
safety shutoff available
-
Patented
ceramic burner
-
Seamless
no-weld construction
-
Compact,
modular design with no moving parts
-
CSA
International (AGA/CGA) Design Certified
|
|
|
|

|
Compact
All-Weather Gas Infra-Red Heater
Price:
Call
Schaefer
compact heater saves up
to 75% in energy costs. Installs quickly - just hang and
connect
-
Compact
size: Fits standard 2'x4' ceiling panel grids
-
Low
clearances to combustible
-
Pre-assembled:
Just hang and connect
-
Direct
spark ignition with 100% safety shut-off
-
Vented
and unvented operation
-
Mirror
Brite highly polished reflector for maximum reflectivity
-
Multi-poise
mounting: Horizontal to 45°
-
Adjustable
BTUH inputs for design flexibility after installation
|
|
|
|
|
|

Unit
With Decorative Emitter Guard

Standard
Unit Without Emitter Guard
CB-20-N5 20,000BTU/
Natural Gas U-Tube - $700.00 CB-30-N5 30,000BTU/
Natural Gas U-Tube -
$725.00 CB-40-N5 40,000BTU/
Natural Gas U-Tube - $750.00 CB-50-N5 50,000BTU/
Natural Gas U-Tube - $775.00 OPTIONAL
EQUIPMENT: 43485000
- Decorative Emitter Guard Kit for CB Series - $120.00 30348970
- 120V. Thermostat 50-90 F - $28.00 41690350
- Chain Mount Kit -35' Chain & 12 "S" Hooks - $30.00 42924000
Exhaust Hood For Un-vented Use - $45.00 |
Space
Ray Garage and Commercial Gas Infrared Tube
Heaters
Price:
See Pricing Below
Our Tube Heaters operate on the same principle as the sun
warming the earth. The result is quiet, soft, radiant heat
with no drafts. Heat the floor zone, not the ceiling. Our
Tube Heaters can reduce your heating bill 20% to 50%. The
system can pay for itself in a few short years. Heaters
are easy to install and require very little maintenance.
-
Four
different input sizes from 20,000 to 50,000 Btu/hr
-
-
U-tube
design for uniform energy distribution
-
Compact
size for easy installation from 6' to 20' above floor.
Radiant
Emitter Tube System
- 3"
O.D. calorized aluminized steel emitter tube for long life
and high radiant efficiency
- 5-year
limited warranty on the emitter tube
- Smooth
cast iron "U" bend
Vacuum
System
- Products
of combustion are pulled through the combustion chamber
for increased radiant efficiency and greater safety
- No draft
hoods; totally enclosed combustion chamber
Burner
System
- One-piece
cast iron burner
- 10-year
limited warranty on burner
- Direct
outside air for combustion
- 4"
O.D. combustion air intake and vent
- Direct
spark ignition system with step opening gas valve and
100% Gas Shut-Off Safety Control (pre-purge)
- Monitoring
lights for visual diagnosis of maintenance needs
Reflector
System
- Highly
efficient aluminum reflectors
- Reflector
ends are enclosed for maximum radiant heat output and
minimum convection loss
- Suitable
for horizontal or angle mount up to 45 degrees
Other
- Lower
mounting height kit required on heater installations
between 6 and 8 feet
- Optional
deflector kit for reduced clearances to combustible
materials
- Optional
decorative grille kit for drop ceiling applications
|
|
|
|

Available
Equipment
Natural
Gas, Direct Spark Ignition,
24V.
Operating Voltage
Transformer
Included
20,000
BTU - Model #FS20 NED - $555.00
40,000
BTU - Model #FS40 NED - $575.00
60,000
BTU - Model #FS60 NED - $605.00
80,000
BTU - Model #FS80 NED - $735.00
100,000
BTU - Model #FS100 NED - $745.00
120,000
BTU - Model #FS120 NED - $885.00
Natural
Gas - Manual Pilot Ignition via Self-Generating Power Supply
(Millivolt
Thermostat Supplied)
20,000
BTU - Model #FS20 NSG - $600.00
40,000
BTU - Model #FS40 NSG - $625.00
60,000
BTU - Model #FS60 NSG - $675.00
80,000
BTU - Model #FS80 NSG - $800.00
100,000
BTU - Model #FS100 NSG - $825.00
120,000
BTU - Model #FS120 NSG - $900.00
|
Fostoria
High Intensity Gas Infrared Heaters
Price:
See Below
Modular Burner Design
The Fostoria modular burner, with ceramic tile, delivers
high intensity radiant heating (approx. 1725° F) at the
burner surface. The radiant source consists of a serrated
ceramic surface with a minimum of 190 perforations per
square inch. Flame is concentrated at the tile, increasing
the surface temperature, and thus increasing radiant
output, while offering greater resistance to drafts and
wind. By utilizing individual venturis for each burner
module, each heater achieves nearly 100% combustion
efficiency. This reduces the amount of by-products left in
the heated space. The modular burner design allows all
heaters, 20,000 through 120,000 BTU, to operate at their
designed capacity and rating.
Features:
* CSA, Formerly Known as AGA, Certified Design
* 6 BTU Sizes in Both Natural & LP Gas
* Modular Burners - 20,000 / 17,500 BTUH per Burner
* Designed 8°Angle of Combustion Surface
* Horizontal to 20° Angle Mounting
* .050" Bright Aluminum Reflector
* Reinforced Corners
* Easy Mounting via Chains & 'S' Hooks
* 24V Operating Voltage - Eliminates Need to Run Wiring in
Conduit
Applications:
* Factories / Manufacturing Areas
* Farm Buildings
* Pre-Fab Metal Buildings
* Warehouses
* Loading Docks
* Auto Service Garages
* Gymnasiums / Auditoriums
|
|
|
|

|
Marquee
60,000 BTU Gas Infrared Heaters For
Protected Outdoor Applications
Price:
$955.00
The FLM series
"Marquee" is a hi-intensity space heater
designed for use in semi-protected outdoor applications
where wind can be a problem. This series is available in
40 and 60Mbtu/h inputs, natural gas only. The FLM series
is not CSA certified.
|
|
|
FHK200
& 400 Model Portable Infrared Heaters are on
Stands
FHK600
& 800 Model Portable Infrared Heaters are on Wheeled Carts
|
FOSTORIA
ELECTRIC PORTABLE
INFRARED HEATERS
Price:
FHK200 SERIES - $285.00
FHK400 SERIES - $350.00
FHK600 SERIES - $565.00
FHK1300 SERIES - $875.00
FOR
INDOOR OR OUTDOOR USE
•
Factory installed U-shaped metal sheath infrared heating elements
have an average 5000 hour life
•
Heavy duty protective wire screens
•
GOLD anodized aluminum internal reflector
•
Double side wall housings to reduce operating temperatures
•
6.0 and 13.5KW heaters have double top baffles to reduce operating
temperatures.
•
60° symmetrical heat pattern
•
Optional 25' long SO type cord, ready for plug attachment is
available for each model.
|
Model
|
Capacity
|
Voltage
|
Size
|
|
FHK224-1A
FHK248-1A
|
2.0 KW
2.0 KW
|
240/1/60
480/1/60
|
28-1/2"
x 12" x 12"
|
|
FHK424-1A
FHK448-1A
|
4.5 KW
4.5 KW
|
240/1/60 480/1/60
|
48"
x 12" x 12"
|
|
FHK624-3A
FHK648-3A
|
6.0 KW
6.0 KW
|
240/3/60
480/3/60
|
37-3/4"
x 19-7/8" x 16"
|
|
FHK1324-3A
FHK1348-3A
|
13.5 KW
13.5 KW
|
240/3/60
480/3/60
|
58"
x 27-1/2" x 19"
|
|
|
|