|
Typical Class I Locations: •
Petroleum Refineries• Gasoline Storage Areas
• Dispensing Areas• Dry Cleaning Plants• Spray Finishing
Areas • Aircraft Hangers• Fuel Servicing Areas• Utility
Gas Plants
Typical Class II Locations: • Grain Elevators•Flour
and Feed Mills
• Plants that Manufacture, Use or Store Magnesium or
Aluminum Powders• Producers of Starch or
Candies•Spice-Grinding Plants, Sugar Plants and Cocoa
Plants• Coal Preparation Plants and other Carbon Handling
or Processing Areas
Typical Class III Locations: • Textile Mills,
Cotton Gins, Cotton Seed Mills, Flax Processing Plants
•Plants that Shape, Pulverize or Cut Wood and Create
Sawdust or Flyings |
|
Certified for Class I,
Division 2, Group D & Class II, Groups F & G and Class III
Hazardous (Classified) Locations Class I:
Hazardous location is one in which flammable gases or
vapors may be present in the air in sufficient quantities
to be explosive or ignitable.
Class II: Are those areas made hazardous by the
presence of combustible dust.
Class III: Are areas where there are
easily-ignitable fibers or flyings present, due to the
types of materials being handled, stored, or processed.
Division 2: Not normally present in an explosive
concentration (but may accidentally exist).
Testing/Certifications Standards: Electrical
Equipment for Use in Class I and Class II, Division 2 and
Class III Hazardous(Classified) Locations.
[UL 1604, Third Edition, October 6, 1995, Including:
Bulletins dated 3/22/95 & 5/17/96]
Non-Incendive Electrical Equipment for Use in Class I,
Division 2 Hazardous Locations [CSA C22.2 No. 213-M1987]
Electrical Fans [UL-507, Ninth Edition, 9/24/01 and Fans
and Ventilators [CSA C22.2 No. 113-M1989. Sixth Edition]
|
|
|
WayCool
1HP
Designated Hazardous Location /
"Explosion Proof"
Evaporative Cooler:
SPECIAL SUMMER DISCOUNT OFF LIST PRICE of $6870
High efficiency cooling pads
High impact ABS plastic with UV protection
Simple maintenance required
Low operating cost
Cord connected
ETL certified for United States and Canada
Specs:
Housing Molded ABS Plastic / Aluminum Frame
Aluminum Base Cradle
Casters 5" Hard Plastic Casters
Fan Type 15" Centrifugal Blower
Fan Motor 1 Hp / Two Speed / 15Amp / 60Hz
Motor R.P.M. 1725 / 1140 R.P.M.
Pump Self-Priming Submersible / 160 Gal./Hr.
Pump Motor .82 Amp / 52 Watts
Air Delivery 55 M.P.H. / 4,400 Feet Per Minute
Air Spout 360 Degree Rotation
Discharge Opening 9" x 18"
Water Supply Standard 3/4" Garden Hose
Water Reservoir 24 Gal. / Float Valve for Water Stop
Evaporation Media 16 S.F. Cross Fluted Cellulose
Dimensions 33" x 33" x 52"H
Unit Weight 220 lbs. / Shipping Weight 280 lbs.
|
