Cooling Fans, Vests Logo

evaporative vests, ms cooling vests

 

Gas Powered Infrared Heating 

 


 

 

 

 

 

 

 

 

 

 

Part No.  Model                 BTU/Hr. Gas Type 

BLACK ENCLOSURE

12001-2     S25 Nat AGA Black   25,000     Natural -$845.00
12202-2     S34 Nat AGA Black   34,000     Natural - $875.00
12003-2     S25 LP  AGA Black   25,000     Propane - $845.00
12004-2     S34 LP  AGA Black   34,000     Propane - $875.00
12006-2     Mounting Kit - Black
$40.00

STAINLESS STEEL ENCLOSURE
12001-4    S25 Nat AGA SS        25,000     Natural - $955.00
12002-4    S34 Nat AGA SS        34,000     Natural - $1,025.00
12003-4    S25 LP  AGA SS        25,000     Propane - $955.00
12004-4    S34 LP  AGA SS        34,000     Propane - $1,025.00
12006-4   Mounting Kit - SS $75.00

 

 

 

SunPak S25 and S34 Compact Gas Patio Heaters

              

             Price: SEE BELOW

These attractive SUNPAK "S" Series of Gas Infrared Heaters will increase the use and enjoyment of your outdoor dining areas. The warm red glow of radiant heat attracts people to your outdoor tables on cool days and evenings when your patio might otherwise be empty. The streamlined design and stainless steel look blends in well with most any decor. SUNPAK patio heaters easily mount on outdoor walls, under ceilings and awnings.

SUNPAK is A.G.A. design-certified as an unvented infrared heater for outdoor or indoor installation. All units are equipped with spark ignition and 100% shutoff for safety, economy, and convenience.

SUNPAK's aluminized steel enclosure and aluminum face grille provides resistance to wind and rain. A slim body and 0-30 degree angle mounting option on most models, gives SUNPAK patio heaters the versatility to fit easily into a wide variety of patio situations.

SUNPAK's radiant sunshine warms people with quiet, gentle heat. Radiant heat warms people and objects (like chairs and tables) rather than the air.

SUNPAK patio heaters are simple to operate, inexpensive to use and easy to maintain.

Two basic SUNPAK models are available.  The model S25, with an input rating of 25,000 BTUH, is suitable for patios with a medium ceiling height.  The model S34, with an input rating of 34,000 BTUH, will cover a slightly larger area, but requires a higher ceiling.  In a moderate climate, SUNPAK can be expected to raise the outdoor comfort level up 10 degrees.  The S25 heater typically covers a 10 foot x 10 foot area.  The S34 heater covers approximately a 12 foot x 12 foot area.  Coverage will vary with ambient temperature, wind chill, mounting height and tilt angle of the heaters.

SUNPAK's aluminized or stainless steel enclosure, together with the aluminum face grill, provides resistance to wind and rain.  SUNPAK's slim body design (8 x 8 x 48 inches) and 0 to 30 degree angle mounting option on most models, gives SUNPAK the versatility to fit easily into a wide variety of patio situations.  An optional mounting kit (part no. 12006-#) is available.

FEATURES INCLUDE:

  • Slim Profile
  • Decorative Safety Grille
  • Reduced Clearance Requirements
  • Angle Mounting -- Zero to 30 Degrees
  • Ideal for Wind Protected Areas
  • Rain Protected
  • 25,000 or 34,000 BTU/Hr. Input
  • Natural or Propane Gas
  • Direct Spark Ignition
  • 100% Safety Shutoff
Model
No.
Angle
Mount
Btu Input
Mount
Height
Heater
Spacing
Area
SqFt
BTUH/SqFt
Cleanrance to
Combustibles
Total Height
S25
25,000
8
8
64
391
8"
8' 8"
S25
25,000
9
10
100
250
8"
9' 8"
S25
25,000
10
12
144
174
8"
10' 8"
S25
30°
25,000
7*
10
100
250
14"
8' 2"
S25
30°
25,000
8
12
144
174
14"
9' 2"
S25
30°
25,000
9
15
225
111
14"
10' 2"
S34
34,000
9
10
100
340
13"
10' 1"
S34
34,000
10
12
144
236
13"
11' 1"
S34
34,000
11
15
225
151
13"
12' 1"
S34
30°
34,000
8
10
100
340
18"
9' 6"
S34
30°
34,000
9
12
144
236
18"
10' 6"
S34
30°
34,000
10
15
225
151
18"
11' 6"

 

 


 

SunGlo Natural Gas Hanging Patio Heater

 

Price: Manual Piezo Ignition - Model#A244 - $795.00

           24V. On/Off Staged Pilot - Model#A244V - $895.00

           Electronic Ignition - Model#A244EN - $955.00

 

The A244 Hanging Patio Heater is great when you don’t want to take up valuable floor space and you have high enough ceiling to accommodate the unit. Since the overall height of the heater is 41”, at least a 10 to 12 foot ceiling height would be required for installation. The "EN" Model is equipped with Electric Ignition and 24 volt transformer. Once connected to a switchable electrical supply and natural gas, the unit can be powered on by a light switch, thermostat, timer, etc.). In windy conditions, if the burner flame blows out, the “EN” model automatically re-ignites the burner. With 50,000 BTU’s, you will get approximately 320 sq.ft. of heated area. 

 

FEATURES INCLUDE:

  • 50,000 BTU/Hr. Rating
  • Safety Shutoff
  • Ceiling Mount Included
  • Manual Piezo, Optional 24V., or Electronic Ignition
  • Ideal for Wind Protected Areas
  • 24 Volt Control includes Transformer
  • Corrosion Resistant
  • CSA Certified

 


 

Ceramic Fan Forced Heater: Model # 178 TMC

 

Price: $65.00

2-heat settings: 850 w and 1500 w
fan only setting
temperature control thermostat
automatic reset type limit control
thermal cut-off device
6' long - 3 conductor cord

 


 

Fan Forced utility Heater: model # ICH 240C

 

Price: $135.00

Operates on 240v or 208v
steel tubular heating element
36°F heat rise
internal overheat thermostat
temperature control thermostat
6' long cord set with 20 amp NEMA cord&plug

 


 

 

 

 

 

 

 

Heat Exchanger & Reflector Features:
· 16 ga. / 4” Alumi-therm Steel Combustion Chamber (1st 10’ or 20’)
· 16 ga. / 4” Hot Rolled Black Steel Emitter Tube(s)
· Optional 16 ga. / 4” Aluminized Black Coated
· Emitter Tube(s)
· Aluminized Steel Turbulator Baffle for Max. Efficiency
· Milled Aluminum Reflectors Individually Adjustable to 45°
· Reflector End Caps for Increased Efficiency
· Wire Form Hangers that Open for Ease of Installation

Commercial/Industrial Gas Infrared Tube Heaters

 

Price:   Call for Pricing

Our Tube Heaters operate on the same principle as the sun warming the earth. The result is quiet, soft, radiant heat with no drafts. Heat the floor zone, not the ceiling. Our Tube Heaters can reduce your heating bill 20% to 50%. The system can pay for itself in a few short years. Heaters are easy to install and require very little maintenance.

System Features:
· CSA Design Certified (Formerly A.G.A.)
· Straight, U, or L-Shaped Systems
· Versatile - 8 BTU/H Inputs / 15 Tube Lengths
· Minimal Field Assembly

Burner Features:
· 40-200 MBTU/H (N or LP gas)
· 120 V controls with Hot Surface Ignition and 100% Safety Lockout
· Single Pressure Switch Operation
· Enclosed Blower (fan with Thermal Overload Protection and Balanced Air Rotor)
· Outside Combustion Air Collar
· Corrosion Resistant Powder-Coated Enclosure
· Operational Indicator Lights
· Site Lens for Viewing Flame / Glow Bar Operation
· High Altitude Models (75-150MBTU/H)

 


 

High Intensity Gas Infrared Heaters

 

Price:   Call for Pricing

Modular Burner Design
The Fostoria modular burner, with ceramic tile, delivers high intensity radiant heating (approx. 1725° F) at the burner surface. The radiant source consists of a serrated ceramic surface with a minimum of 190 perforations per square inch. Flame is concentrated at the tile, increasing the surface temperature, and thus increasing radiant output, while offering greater resistance to drafts and wind. By utilizing individual venturis for each burner module, each heater achieves nearly 100% combustion efficiency. This reduces the amount of by-products left in the heated space. The modular burner design allows all heaters, 20,000 through 120,000 BTU, to operate at their designed capacity and rating.

Features:
* CSA, Formerly Known as AGA, Certified Design
* 6 BTU Sizes in Both Natural & LP Gas
* Modular Burners - 20,000 / 17,500 BTUH per Burner
* Designed 8°Angle of Combustion Surface
* Horizontal to 20° Angle Mounting
* .050" Bright Aluminum Reflector
* Reinforced Corners
* Easy Mounting via Chains & 'S' Hooks
* 24V Operating Voltage - Eliminates Need to Run Wiring in Conduit

Applications:
* Factories / Manufacturing Areas
* Farm Buildings
* Pre-Fab Metal Buildings
* Warehouses
* Loading Docks
* Auto Service Garages
* Gymnasiums / Auditoriums

 


 

Marquee 60,000 BTU Gas Infrared Heaters For Protected Outdoor Applications

 

Price: $895.00

The FLM series "Marquee" is a hi-intensity space heater designed for use in semi-protected outdoor applications where wind can be a problem. This series is available in 40 and 60Mbtu/h inputs, natural gas only. The FLM series is not CSA certified.

 


 

FHK200 & 400 Model Portable Infrared Heaters are on Stands  

FHK600 & 800 Model Portable Infrared Heaters are on Wheeled Carts

 

PORTABLE INFRARED HEATERS

 

      Price:    

            FHK200 SERIES - $245.00

            FHK400 SERIES - $290.00

            FHK600 SERIES - $468.00

            FHK800 SERIES - $745.00

 

FOR INDOOR OR OUTDOOR USE

• Factory installed U-shaped metal sheath infrared heating elements have an average 5000 hour life

• Heavy duty protective wire screens

• GOLD anodized aluminum internal reflector

• Double side wall housings to reduce operating temperatures

• 6.0 and 13.5KW heaters have double top baffles to reduce operating temperatures.

• 60° symmetrical heat pattern

• Optional 25' long SO type cord, ready for plug attachment is available for each model.

 

Model

Capacity

Voltage

Size

FHK212-1CA
FHK220-1A
FHK224-1A
FHK248-1A

1.8 KW
2.0 KW
2.0 KW
2.0 KW

120/1/60
208/1/60
240/1/60
480/1/60

28-1/2" x 12" x 12"

FHK420-1A
FHK424-1A
FHK448-1A

4.5 KW
4.5 KW
4.5 KW

208/1/60
240/1/60
480/1/60

48" x 12" x 12"

FHK620-3A
FHK624-3A
FHK648-3A

6.0 KW
6.0 KW
6.0 KW

208/3/60
240/3/60
480/3/60

37-3/4" x 19-7/8" x 16"

FHK1320-3A
FHK1324-3A
FHK1348-3A

13.5 KW
13.5 KW
13.5 KW

208/3/60
240/3/60
480/3/60

58" x 27-1/2" x 19"

 


 

To find out how to order any product from our website, click here.


Click here to return to "Heating Products" page.

Click here to go back to Aquality's main page.