Mist Cooling Fans
|
High Pressure Misting, Misting Fans & Mist Cooling Systems
Aquality's mobile misting fan inventory includes Aqua Breeze fans and misting systems. Aqua Breeze mobile high pressure misting systems are comprised of uniquely integrated components that capitalize on flash evaporative cooling. Flash evaporative cooling takes advantage of atomization technology that produces ultra-fine water particles to lower the ambient temperature of an area without getting floors or the ground wet. Among mist cooling systems, the Aqua Breeze mobile cooling system can move 6000 cubic feet of air per minute and can cool up to over 1800 square feet all while reducing the ambient temperature by as much as 30 degrees Fahrenheit.
We also carry a number of systems equipped with Schaefer Industrial Fans. For personal cooling and heating, try our high quality personal heating and cooling devices. The deluxe cooling vests we carry are available in flame retardant material and draw on phase change technology. Phase change materials (PCM) release long-lasting, temperature-specific phase change cooling energy that can be used in a variety of applications. To cool, PCM “melts” to a liquid state as it absorbs heat. It maintains temperatures ranging between 40°F/4°C up to 65°F/18°C. This technology is also employed in the ArctiCollar Cooling Neckwrap product we offer. |
|
Front
View - Click to enlarge
Specifications:
Pump: 0.50
GPM Commercial grade pump.120V./60Hz. 5 AMP - 800-1000 PSI Operating
Pressure.
Fan: High performance
industrial 24 inch fan which produces 8,600 CFM. Totally enclosed motor,
permanently lubricated split capacitor.
Misting
Ring: 18" Stainless Steel Mist Ring with 6 .008" brass and stainless
steel nozzles.
· Multiple Unit
Discounts Available
· PROUDLY MADE IN
THE USA! |
Aquality's Port-A-Chill Stainless Steel 20 Gallon
Portable Misting Fan
Aquality’s Port-A-Chill Portable Misting Fan is an affordable means to give instant heat relief to any area. With a 20 Gallon tank, the unit is truly portable... no need for a water tap or other connected water supply! The fan is,
however, equipped with a garden hose connector so that it can be hooked to a constant water supply for continuous operation if available. Simply fill the tank with water, plug it into a standard 120 Volt outlet and sweltering temperatures can be reduced by as much as 30 degrees!
With a 24" High Velocity
8,500 CFM fan and equipped with an 800-1000 PSI Pump for a fine "fog", the fan can reach areas up to
50 feet away with cool refreshing air. The Port-A-Chill frame is made of heavy gauge Stainless Steel tubing and comes standard with over-sized pneumatic "flat free" wheels for easy movement over rough and uneven terrains. The unit can be transported easily by vehicle in either a standing or horizontal position.
You can expect from 3-4 hours of refreshing mist on a single "fill-up" of the 20-gallon tank. Running time can be increased by reducing the number of nozzles being used with nozzle plugs.
The Aquality Port-A-Chill is perfect for cooling:
|
|
1000 PSI High Pressure Misting Pump
Compact Envelope-Low Center of Gravity
32 Gallon Tank provides 6-8 hours between fresh water refill
High Pressure Fogging Systems for Cooler/Dryer Air
Drops Ambient Temperature 15-25 Degrees
Frame is Powder Coated for Extended Life in Harsh Conditions
Fan & Switch Box Positioned into Frame for Protection
Caster Wheels for Easy Moving from Pick-up to Work Area
Locking Rear Casters
• Safe, Spark Resistant Cast Propeller Blade
• Nickel Plated Guard
• Weight Empty 135 lbs
• 4000 lb Crane Liftable Loop
Aquality Hazardous Location Port-A-Chill
Totally Portable Unit - Use Indoor or Outdoor
• Cool Air up to 50ft. Away
• Excellent for use in Hazardous/Gaseous Areas
Helps Eliminate Heat Stroke/Exhaustion
Reduces Absenteeism
Reduces Workman's Comp Claims
Excellent for Use IN / ON:
Drilling Rigs
Oil Platforms
Oil Fields
Pipeline Areas
Chemical Plants
Refineries
|
Aquality Hazardous Location Port-A-Chill Class I Div II Hazardous Rating (Div I Option)
Aquality Hazardous Location Port-A-Chill |
Fan Size |
HP |
CFM |
Coverage Area |
Tank Size |
Ship Weight |
Dimensions |
Retail |
PAC-HL-24-110 (110V. Single Phase) |
24” |
½ |
12,000 |
1,500 sq.ft. |
32 Gal |
170# |
30W x 44L x 51H |
|
PAC-HL-24-220 (220V. Single Phase) |
24” |
½ |
12,000 |
1,500 sq.ft. |
32 Gal |
170# |
30W x 44L x 51H |
|
|
|
Specifications:
SHIPPING WEIGHTS:
Fan 50 lbs., Base and Column 80 lbs.
FAN:
Voltage 115 VAC, single phase, Current (115V.) 4.0Amps
Motor 115V./60Hz, single speed, HP - 1/4
Current (115V.) 3.4 Amps, Maximum RPM @60Hz 5000, Maximum CFM @60Hz 6000, Oscillation Angle 45 or 90 degree
Nozzles (8) w/ .008" orifice standard
PUMP:
Motor 115 VAC/60Hz, Maximum pressure 1000 psi, Maximum flow 0.5 GPM, Current (115V.) 15Amps, Water filtration 5 micron.
Features:
- Heavy duty stainless steel construction for use in even the most harsh environments.
- High pressure stainless steel misting nozzle ring with replaceable brass anti-drip nozzles atomize water droplets.
- State-of-the-art aerodynamic shroud design.
- Vane tube-axial oscillating fan capable of 4 different tilt adjustments for specific cooling needs.
- Dual filtration system utilizing 10" filters with a 10 and 5 micron water filters.
- Uses common 120V electric circuit and comes standard with a 25ft heavy duty power cord.
- Oversized pneumatic wheels for easy transport over uneven terrain.
- Uses standard garden hose water connection for easy hook up.
DEALER INQUIRIES
WELCOMED!
PROUDLY MADE IN
THE USA |
Aquality
AquaBreeze Mobile 2 Industrial Misting Fan Cart
Aquality
Water Systems, Inc., is pleased to offer the AQUABREEZE
MOBILE 2 line of mobile misting fan systems in .5, 1.1, and
2.2 GPM sizes. That means that the MOBILE 2 is now able to run up to 12
satellite fans with proper pump configuration (see Aquabreeze Satellite
Misting Fans below). As one of the most advanced misting systems on the
market today, these industrial strength stainless steel cooling fans
will cool any work site or outdoor/sporting event at a fraction of the
cost of conventional air conditioning.
The AQUABREEZE mobile cooling system is a unique and
totally integrated product that utilizes flash evaporative cooling.
Flash evaporative cooling uses the ultra-fine atomization of water
particles to lower the ambient temperature of an area without getting
floors or the ground wet.
The AQUABREEZE mobile cooling system can move 5000 cubic feet of air per minute and can
cool up to 45 linear feet in either a 0, 45, or 90 degree arch. The unit can reduce the ambient
temperature of this area by up to 30 degrees Fahrenheit! All this for less than 40 cents a day,
electric and water combined. |
|
|
Deluxe Satellite Model
6720 |
Aquality's
AquaBreeze High Pressure
Satellite
Misting
Fan
NOTE:
Requires a High Pressure AquaBreeze Mobile 2 Misting Fancart (Click
Here)
The AquaBreeze Satellite Misting Fan is used to
expand an AquaBreeze Mobile 2 High Pressure Mobile Misting FanCart (see
above) into a multi-fan system capable of covering a very large area or sports
sideline. The frames are constructed of stainless steel which not only
make them extremely durable, but attractive as well. The unit price
includes a 25' long high-pressure manifold hose with female quick
disconnect on the end for easy connection to the AquaBreeze Mobile
2 Misting Fancart unit which is required to pressure this satellite
fan.
Specifications:
Fan:
6720 Model -Voltage 120 VAC, 3
Amps, 1/4 HP Motor, , single speed, 1100 RPM variable speed controlled, 1700 RPM.
Misting
Ring: 18" 316 Stainless steel with 8 .008" brass and stainless
steel nozzles. |
|
Specifications:
Pump: .50
GPM Industrial Cat™ pump. The Cat™ pump is backed
by a two year unconditional warranty.
Fan: High
performance industrial 24 inch oscillating fan with two speeds and
produces 6,800/5,000 CFM. Totally enclosed motor, permanently lubricated split
capacitor.
OR
High
performance industrial 30 inch oscillating fan with two speeds and
produces 7,900/6,000 CFM. Totally enclosed motor, permanently lubricated split
capacitor.
Misting Ring: 18" 304 Stainless steel with 8
.008" brass and stainless steel nozzles..
Toggle Switch: Weather proof 3 way Switch for
"MIST & FAN / OFF / FAN ONLY" settings.
|
Aquality's
HYDROBlast High
Pressure
Mobile Misting FanCart
Since 1993 Aquality
Water Systems has been producing misting systems. This experience has produced the
“HYDROBlast". By adding a super fine mist (10 Micron or
smaller) to a 6,000 CFM directed airflow, the unit can cool ambient air
temperature in an area by as much as 30 degrees. Even in areas of higher
humidity, our system is able to cool without wetting.
One
of the most impressive features of the HYDROBlast system is its ability
to deliver high pressure mist to up to two
additional HYDROBlast Satellite Fans (See Below) which are
attached by quick connects and a 25' high-pressure line to the main HYDROBlast fancart misting pump.
The
industrial grade 1000 PSI pump system has been designed with only the
highest quality components. They are also equipped with a low-pressure
water sensor so that unit can never be damaged due to being run "dry"
and 5 Micron filtration to keeping nozzles virtually maintenance free.
Our
intention is to make quality high pressure fans affordable to end-users
for:
-
Outdoor
Patios
-
Restaurants
-
Manufacturing
Facilities
-
Catering
and Special Events
-
Sports
Sidelines and Training Fields
-
Military
-
Horse /
Livestock / Poultry Barns
-
Construction
Sites
-
Foundries
-
Golf
Courses
-
Hotels and
Spas
-
Festivals
& Amusement Parks
-
Concert
Events
· Multiple Unit
Discounts Available
· PROUDLY MADE
IN THE USA! |
|
|
Aquality's
HYDROBlast
High
Pressure Satellite Misting
Fan
Note: Requires
the High Pressure Hydroblast Mobile Misting Fancart (Click
Here)
The HYDROBlast 24" and 30" Satellite Misting Fan is used to expand a HYDROBlast High Pressure Mobile Misting FanCart (above) into a
system capable of covering a very large area. The unit price includes a
25' long high-pressure manifold hose with female quick disconnect on the
end for easy connection to the HYDROBlast FanCart unit, which
which is required to supply high-pressure water to this satellite
fan.
Specifications:
Fan: High
performance industrial 24 inch oscillating fan with two speeds and
produces 6,800/5,000 CFM. Totally enclosed motor, permanently lubricated split
capacitor.
OR
High
performance industrial 30 inch oscillating fan with two speeds and
produces 7,900/6,000 CFM. Totally enclosed motor, permanently lubricated split
capacitor.
Misting Ring: 18" 316 Stainless steel with
eight .008" brass and stainless steel nozzles equipped with anti-drip
valves.
|
|
10 Gallon
Portable Mist Fan Complete
With
Tank
A10GP
Fan
Head and Pump Only - No Tank
A10GPMNC |
Aquality's 10 Gallon
Portable Misting Fan
If
you already have a compatible 10-gallon cooler (IGLOO Only), you may order the Fan
and Pump/Cover alone:
Aquality’s 10 Gallon portable misting unit is an amazing
and affordable way to give instant heat relief to any outdoor area or
event. The system is extremely easy to transport and can be set-up in
less than a minute. You can expect up to 4 hours of cool refreshing mist
from a single "fill-up" of the 10-gallon tank. Sweltering temperatures
can be reduced by as much as 20°. Aquality's 10
Gallon Portable Misting Fan is perfect for cooling:
The
10 gallon tank is included in the price. The 10 Gallon
Portable Misting Fan comes with four misting nozzles and runs on
standard 110 voltage. It is also equipped with a safety tilt switch
which automatically interrupts power if unit is knocked
over.
Specifications:
Pump: Patented
Enclosure, 130 psi, drawing 2.5 amps, Totally Enclosed Motor with GFCI
plug
Fan: 18" OSHA approved guard, 1/10 HP, single
phase, .9/.45 amps, 1725 RPM, 5800 CFM.
Misting
Nozzles: 4 - .012" 3/4 GPH Brass and Stainless
Shipping Weight: 36 lbs. Fan Unit with Tank
50 lbs. Cart Unit
32 lbs. Fan Unit without Tank
|
|
|
Aquality's 14 Gallon Portable Misting Fan Cart
Aquality’s 14 Gallon Portable Misting Fan Cart is an compact way to give instant heat relief to any outdoor area or event. The system is extremely easy to transport and can be set-up in less than a minute. You can expect up to 7 hours of cool refreshing mist from a single "fill-up" of the 14-gallon tank. Sweltering temperatures can be reduced by as much as 20°. Molded reservoir has integral wheels and pull handle for easy unit transport, empty or full.
46" tall when assembled. Tank dimensions are 24 tall x 15 diameter.
Aquality's 14 Gallon Portable Misting Fan is perfect for cooling:
- Sports Teams
- Rentals
- Firefighter Rehabilitation
- Military
- Pool Decks (Hotel and Residential)
- Tailgate Parties
- Racing Teams
- Camping
- Festivals
- Amusement Parks
- Construction Sites
The 14 Gallon Portable Misting Fan comes with four misting nozzles and runs on standard 110 voltage. It is also equipped with a safety tilt switch which automatically interrupts power if unit is knocked over.
Specifications:
- Pump: 130 psi, drawing 3 amps, Totally Enclosed Motor with GFCI plug
- Fan: 18" OSHA approved guard, 1/10 HP, single phase, .9/.45 amps, 1725 RPM, 5800 CFM.
- Misting Nozzles: 4 - .012" 3/4 GPH Brass and Stainless
- Shipping Weight: 42 lbs.
- Multiple Unit Discounts Available
|
|
|
Aquality High Pressure Complete Mist Fan Kits with 24"or 30" Industrial Wall
Mount Fans
(Oscillating and Non-Oscillating)
Aquality now is providing one of the most advanced
misting fan systems available on the market today. We will provide you
with everything necessary to install whatever size system you require
and take all of the guesswork out of the equation in regards to what
kind of pump and fans you might need to create a comfortable environment
in residential, commercial, and industrial
applications.
Includes:
-
Aquality Open Frame 1000 PSI High Pressure Pump Unit (Upgrade to
Aquality Industrial Stainless Steel Enclosed Pump unit available for an
additional charge).
- 24"
Industrial Oscillating or Non-Oscillating Wall-mount fans with wall
mounting brackets.
- Fan
Specs:
Fan Size: 24"
Oscillator
CFM: 5200 / 4440
H/P:
1/4
Volts: 115
AMPS: 2.2 / 3.0
- 18"
Single Stage Stainless Steel Misting Rings - 6 Nozzle (for 24"
Fans)
Fan
Size: 30" Oscillator
CFM: 9800 / 9300
H/P: 1/2
Volts:
115
AMPS: 3.5 / 4.7
- 24"
Single Stage Stainless Steel Misting Rings - 8 Nozzle for 30"
Fans)
- 1500
PSI Flexible High Pressure Manifold Lines
-
Mounting Materials
- All
necessary brass and stainless steel fittings
(1) CHOOSE NUMBER AND DIAMETER OF
FANS
24-inch diameter fans:
30-inch diameter fans:
(3) PUMP UPGRADE OPTION: Stainless Steel
Enclosed Misting Pumps are available instead of "open frame" misting
pumps (seen pictured) for an additional charge. Recommended for
any outdoor/unsheltered pump installs.
(4) ACCESSORY NOTE: Extra Manifold/Tubing Line
May be Necessary for Some Expanded Installations. Additional Line Can be
Purchased Separately.
|
|
|
Aquality
36" Oscillating Mobile Misting Fan
This 3-foot diameter
oscillating high-pressure fan can reduce air temperatures by as much as
35 degrees F. Industrial-quality components deliver 11,000 cubic
feet per minute of cool air up to 65 feet away.
-
Auto drain valve reduces
nozzle clogging
-
Brass and stainless steel
nozzles and fixtures
-
12 nozzle misting
ring
-
High quality pump designed
to withstand many years of use.
-
Adjustable fan oscillation
from 0 to 90 degrees for wide range of coverage.
-
Low pressure shut-off
protects pump if water is interrupted.
-
8" Industrial wheels for
ease of transport.
Specifications:
|
|
FAN RETROFIT KITS include MISTING
RINGS
[Fan NOT included; see above for
complete fan systems]
|
Aquality High-Pressure "Do It Yourself" Fan Retrofit
Mist Cooling Systems
Aquality’s "Do It Yourself" (DIY) Mist Cooling
System atomizes ordinary water into super fine 10-micron droplets which
are flash evaporated by the surrounding hot air, causing an immediate
reduction in temperature to effectively cool any outdoor area. We can
produce this ultra-fine mist by utilizing a high-pressure pump module
which connects to your garden hose and a 110 VAC electrical outlet. It
pressurizes the water from 800-1000 PSI and forces it through an .008"
orifice in the nozzles. A misting ring is attached to the face of your
existing fan.
Standard features include: 5 Micron Water
Filtration, High Pressure Motor/Pump Combination, On/Off Switch, .008
Nozzles with Anti-Drip Check Valves.
Systems are available in
1,2,3,4, and 6 ring kits (Larger Systems Available by Quote).
Standard rings are 18" diameter.
800-1000 PSI Operation, Absolutely
No Wetting or Dripping, Easy to Install, uses “Push On” Fittings, no
tools required, installation in approximately 1 to 3 hours (depending on
system size).
Nozzles may be added or removed at your
discretion.
Kit includes: Open Frame Light Duty Pump
module, 18" 6 nozzle single stage stainless steel misting rings, tubing
and necessary fittings. Larger rings available for larger fans.
Warranty - 1
Year
(1)FAN RETROFIT KITS: Includes
misting rings to add Mist Cooling to your existing outdoor
fans. (If you do not have pre-existing fans, please see the Aquality High Pressure Complete Misting Fan Systems offered above.
(2) PUMP UPGRADE OPTION: Stainless Steel
Enclosed Misting Pumps are available instead of "open frame" misting pumps
(seen pictured) for an additional charge. Recommended for any
outdoor/unsheltered pump installs.
(3) ACCESSORY NOTE: Extra Manifold/Tubing Line May
be Necessary for Some Expanded Installations. Additional Line Can be
Purchased Separately.
|
|
|
Aquality
AquaBreeze Wall Mount
Misting Fan
Aquabreeze Wall Mount Mist Fan
- Requires separate high pressure pump unit (Click Here)
- Wall mounting bracket included.
- High pressure stainless steel misting nozzle ring with replaceable brass anti-drip nozzles atomize water droplets.
- State-of-the-art aerodynamic shroud design.
- Vane tube-axial oscillating fan capable of 4 different pin adjustments for specific cooling needs.
- Uses common 120V electric circuit and comes standard with a 25ft heavy duty power cord.
Specifications:
SHIPPING WEIGHTS:
Fan 50 lbs.
FAN:
Voltage 115VAC, single phase, Current (115V.) 4.0A
Motor 115VAC, 60Hz, speed controlled, HP --1/4
Current (115) 3.4Amp, Maximum RPM @60Hz -- 1700, Maximum CFM @60Hz 6000, Oscillation Angle 45 or 90 degree
Nozzles (8) w/ .008" orifice standard |
|
Single Stage 18" 4 Nozzle Stainless
Steel Mist Ring
|
Aquality
Misting Rings
Price: See Below
Retrofitting your existing industrial fans
with Aquality's misting rings is an economical way to cool an
indoor/outdoor work area.
Misting Ring Specs:
316 Stainless Steel
Tubing
Misting rings can include an optional
8 feet of manifold line with 1/4" female fitting.
Optional Second
Stage: 15" or 18" fog ring.
Nozzles: .008 orifice
Manifold: 1/4"
high-pressure line. Rated at 1500 PSI
Fittings: Stainless Steel /
Brass
Standard Sizes and Nozzle
Configurations:
|
|
University of Texas
Nebraska
University of Georgia
Michigan State University
University of Minnesota
Auburn University
Texas A&M University
Eastern Michigan
McNeese State University
Southwestern University
|
Aquality's
Sports Sideline Mist Fan Cooling Systems
Price: Call or Contact us for Custom Quote on System Sales or Rentals
Aquality understands the need for athletes to be able to play at
their peak performance levels. Yet while pushing their bodies to the
limit ... they also run the risk of suffering heat exhaustion, heat
stroke, and possibly DEATH. We have designed the Aquality Sports
Sideline Cooling System with one thing in mind, to provide them with
a heat rehabilitation area (typically 20-35° cooler than ambient
temperature) to keep players performing at the highest level SAFELY even in the harshest climates during practice and for THE BIG
GAME.
The
industrial grade 1000 PSI high pressure pump system has been
designed with only the highest quality components to produce the
finest mist possible to achieve the maximum cooling effect without
wetting. They are also built with a low-pressure water sensor so
that unit can never be damaged due to being run "dry" and
5 Micron filtration to keeping nozzles clear and virtually maintenance free. All high pressure connections for fan lines have easy to use
"quick disconnect" fittings so that set-up of system can
be done quickly and without the use of tools. The 90° Oscillating
Fan is a 3 Speed unit capable of producing an impressive 6,800 CFM. Oscillation can be stopped for those players needing a little extra
relief. The fans are equipped with either
single stage or two stage misting rings to control the mist output.
They are also outfitted with oversized rubber wheels for easy
transport over uneven terrain.
Aquality Water Systems has always dedicated itself to quality
products and unwavering customer service. We invite you to
experience this for yourself. Whether it be for Football Sideline Misting Fan Systems, Track and Field
Portable Misting Fans ... Give us a call and we will help you
and your team design the perfect system to fit your needs.
Specifications:
Pump: 1,000 psi pump module
Fan: 24" diameter, 6,800 CFM, fan head oscillates 90°, 1PH,
115v, 60HZ, thermally protected TEAO motor,
3-speed pull chain
Manifold Line: 1500 psi high pressure flex line
Misting Rings: 316 Stainless. Available in Single-Stage ring with 8 Nozzles or in Two-stage stainless steel mist rings, 4 nozzles each.
Can adjust the amount of mist from using all 8 nozzles (high) down
to only 4 nozzles (low).
|
|
|
Available
in .008 or .012 inch orifice
(sold in bags of 5)
|
Brass
and Stainless Misting Nozzles - 5 Bag
|
|
 |
Brass Nozzle Plugs - 5
Bag
-
Use with all mist cooling systems to replace
misting nozzles if less mist is
desired during normal operation.
-
During the off season, replace nozzles with plugs
to keep mist line free of debris.
|
|
|
Replacement Filter Housing
The 3/8" NPT Slim Line 5" and 10” Blue Housing is made of a durable, reinforced polypropylene that is compatible with a variety of chemicals.
Product Specifications:
- Housing Sump: Blue Reinforced Polypropylene
- Connections: 3/8" NPT
- Length: 5" (7" x 4 3/8")
- Max. Temp.: 125 F
- Max. Press.: 125 PSI
|
|
|
Spun Poly Replacement Water Filters for Misting
Pumps
|
|
|
Phosphate Inlet Filter Replacement for
Aquabreeze
|
|
|
Warehouse Ducted Mist Cooling System
Everything you need to provide effective cooling
over a large work area. Connect smooth bore ducting to the blower,
install the mist ring, connect a garden hose, run the ducting through or over the jobsite, and
cut holes where you want cool air. Can be used with optional High
Pressure Mist Pump for "drier" more effective cooling (Click
Here)
Includes: -EB-24 Blower
-500' Roll of Smooth Bore Ducting.
-Misting Ring
-Smooth Bore Stabilizer
-2 Ratchet Ties |
Aquality's Mobile Misting Trailer
Call For Quote on Customized Fabrication or for Cost of
Rental
Call For Quote on Customized Fabrication or for Cost of
Rental
AQUALITY'S MOBILE MISTING TRAILER is a totally self-contained 4
fan misting system. It holds up to 250 gallons of water and is equipped
with a 6500 WATT Generator. The system can be operated for up to 7 hours
without refilling. Excellent for any outdoor event where water and
electric are not readily available.
Trailer - Bed size 6.5' x 14'
Enclosed
Generator - Honda 6500 WATT with electric
start
Water Storage Tank - 200-300 gallon
capacity.
Booster Pump - Provides a 1 GPM flow to the high
pressure pumping unit from storage tank. If water connection is
available, the trailer is plumbed to receive water and bypass the tank
system.
High Pressure Pumping Unit - Industrial quality,
continuous duty high pressure pump 1.1 gallon per minute, 1000 PSI, 1
HP, TEFC, 120/230, 1 PH, 50/60 HTZ electric motor, dual filtration 5
& 10 micron. Thermally protected by-pass and low pressure
shut-off switch.
Fans - 4 Shrouded Oscillating Fans mounted on
bracketed steel pedestals, 7,000 CFM each. Single stage 8
nozzle 316SS fan face, nozzles can be plugged or opened to compensate
for weather conditions, time of day, or necessary run time. Fan motors
are 1/4 HP , 1 PH, 120/230, 50/60 HZ. Fans are stored inside
trailer for ease of transport.
Running Time - 5.8 hours
with all stages running. Water consumption is .022 gallons per
nozzle, per minute.
Lighting - Trailer is equipped with 4 80 watt lights for
evening events.
Gross Weight -
Approximately 5000 pounds
|
|
|
