Mist Cooling Systems, High Pressure Misting Systems,
Complete Mist Fan and Mist Fan Retro-Fit Kits
Mist cooling systems, also called “fogging” systems are equipped with mist nozzles or misting rings and a high pressure pump of 800-1000 psi. These misting nozzles and rings produce and dispense water droplets smaller than 10 microns (this is about 1/10th the diameter of a human hair), and when water droplets this miniscule hit warm/hot air in the immediate vicinity, they flash evaporate. Therefore, a mist cooling system can subsequently reduce the surrounding air temperature by as much as 35 degrees Fahrenheit.
If you’ve been thinking about installing a misting system, Aquality Water can recommend a number of high pressure misting systems and components that can be tailored to your needs and requirements. Depending on the amount and type of space you want to keep cool, you might want to consider a combination of misting fans and industrial fans as part of the high pressure misting system you’re thinking of installing in your home or business. Take the time to browse and compare the following high pressure misting systems, kits and component options Aquality Water Systems makes available.
Questions about how Mist Cooling Works? Or want to know its benefits?
Click
here to read "Mist Cooling - Frequently Asked Questions
(FAQ)" |
|
LINEAR
MIST COOLING SYSTEM installed along roof edge
FAN
RETROFIT KITS include MISTING RINGS
[Fan NOT included; see below for
complete fan systems] |
Aquality High-Pressure "Do It Yourself"
Linear or Fan Retrofit Mist Cooling
Systems
Aquality’s
"Do It Yourself" (DIY) Mist Cooling System atomizes ordinary water into super fine
10-micron droplets which are flash evaporated by the surrounding hot air, causing an immediate
reduction in temperature to effectively cool any outdoor area. We
can produce this ultra-fine mist by utilizing a high-pressure pump module which connects
to your garden hose and a 110 VAC electrical outlet. It pressurizes
the water from 800-1000 PSI and forces it through an .008"
orifice in the
nozzles. The nozzles are spaced apart in a tube that is attached
to the perimeter of your patio or in a misting ring attached to
the face of your existing fan.
Standard features include: 5 Micron Water Filtration, High
Pressure Open Frame Motor/Pump Combination, On/Off Switch, .008 Nozzles with Anti-Drip
Check Valves.
Kit comes in 10, 25, 50, and 90 misting nozzle configurations for
linear systems or 1,2,3,4, or 6 ring configurations for fan
retrofit systems (larger fan retrofit systems can be quoted).
800-1000 PSI Operation, Absolutely No Wetting or Dripping, Easy to
Install, uses “Push On” Fittings, no tools required,
installation in approximately 1 to 3 hours (depending on system
size).
Nozzles may be added or removed at your discretion.
Kit includes: Pump module, mist nozzle tees (for
linear systems) or 18" 6 Nozzle Stainless Steel Misting Rings (for fan retrofit), tubing and
necessary fittings. Larger fan rings with more nozzles are
available.
Warranty: 1 Year
(1) LINEAR
MIST COOLING SYSTEMS:
(2) FAN
RETROFIT KITS: Includes misting rings (instead
of linear nozzles used above) to add Mist Cooling to your existing
outdoor fans. (If
you do not have pre-existing fans, please see the Aquality High Pressure Complete Misting Fan Systems offered below.
(3) PUMP UPGRADE
OPTION: Stainless Steel Enclosed Misting Pumps are
available instead of "open frame" misting pumps (seen pictured) for an
additional charge. Recommended for any outdoor/unsheltered pump
installs.
(4)
ACCESSORY NOTE: Extra
Manifold/Tubing Line May be Necessary for Some Expanded Installations.
Additional Line Can be Purchased Separately.
|
|
High Pressure Misting Pump Modules in 0.5, 1.1, 2.2, and 2.9 GPM
flows (Shown with and without cover)
|
Aquality High-Pressure
Industrial Misting Pumps
Aquality’s
High Pressure Misting Pump Modules in 0.5, 1.1, 2.2, and 2.9 GPM
flows:
Standard features include:
800-1200 PSI operating
pressure, Dual Filtration with 10" 5 and 10 Micron
Cartridges, inlet water solenoid, inlet low water
pressure cut-off switch, inlet water pressure gauge, industrial
auto drain valve, thermally protected bypass loop, thermally protected
motor, on/off switch. Components assembled on shock mounts onto a
steel frame, mechanically ventilated, and enclosed with a
stainless steel cover.
115VAC
/ 60Hz. 24 Hour and Cycle Timer controls available.
Warranty - 1 Year
|
|
|
Aquality High Pressure Complete Mist Fan Kits with
24"or 30" Industrial Wall Mount Fans (Oscillating and Non-Oscillating)
Aquality
now is providing one of the most advanced misting fan systems
available on the market today. We will provide you with
everything necessary to install whatever size system you
require.
We
provide our complete systems to take all of the guesswork out of the equation in regards to
what kind of pump and fans you might need to create a
comfortable environment in residential, commercial, and
industrial applications.
Includes:
-
Aquality Open Frame 1000 PSI High Pressure Pump Unit (Upgrade
to Aquality Industrial Stainless Steel Enclosed Pump unit
available for an additional charge).
-
24" or 30" Industrial Oscillating or Non-Oscillating
Wall-mount fans with wall mounting brackets.
-
Fan Specs:
Fan Size: 24" Oscillator
CFM: 5200 / 4440
H/P: 1/4
Volts: 115
AMPS: 2.2 / 3.0
-
18" Single Stage Stainless Steel Misting Rings - 6 Nozzle
(for 24" Fans)
Fan Size:
30" Oscillator
CFM: 9800 / 9300
H/P: 1/2
Volts: 115
AMPS: 3.5 / 4.7
-
24" Single Stage Stainless Steel Misting Rings - 8 Nozzle
for 30" Fans)
-
1500
PSI Flexible High
Pressure Manifold Lines
-
Mounting
Materials
-
All
necessary brass and stainless steel fittings
(1)
CHOOSE NUMBER AND DIAMETER OF FANS
24-inch diameter fans
30-inch diameter fans
(3) PUMP UPGRADE
OPTION: Stainless Steel Enclosed Misting Pumps are
available instead of "open frame" misting pumps (seen pictured) for an
additional charge. Recommended for any outdoor/unsheltered pump
installs.
(4)
ACCESSORY NOTE: Extra
Manifold/Tubing Line May be Necessary for Some Expanded Installations.
Additional Line Can be Purchased Separately.
|
|
|
Aquality's
Sports Sideline Cooling System
Price:
Call or Contact us for Custom Quote on System Sales or Rentals
Aquality understands the need for athletes to be able to play at
their peak performance levels. Yet while pushing their bodies to the
limit ... they also run the risk of suffering heat exhaustion, heat
stroke, and possibly DEATH. We have designed the Aquality Sports
Sideline Cooling System with one thing in mind, to provide them with
a heat rehabilitation area (typically 20-35° cooler than ambient
temperature) to keep players performing at the highest level SAFELY even in the harshest climates during practice and for THE BIG
GAME.
The
industrial grade 1000 PSI high pressure pump system has been
designed with only the highest quality components to produce the
finest mist possible to achieve the maximum cooling effect without
wetting. They are also built with a low-pressure water sensor so
that unit can never be damaged due to being run "dry" and
5 Micron filtration to keeping nozzles clear and virtually maintenance free.
All high pressure connections for fan lines have easy to use
"quick disconnect" fittings so that set-up of system can
be done quickly and without the use of tools.
The 90° Oscillating
Fan is a 3 Speed unit capable of producing an impressive 6,800 CFM.
Oscillation can be stopped for those players needing a little extra
relief with the push of a button.
The fans are equipped with either
single stage or two stage misting rings to control the mist output.
They are also outfitted with oversized rubber wheels for easy
transport over uneven terrain.
Aquality Water Systems has always dedicated itself to quality
products and unwavering customer service. We invite you to
experience this for yourself.
Give us a call and we will help you
and your team design the perfect system to fit your needs.
Specifications:
Pump: 1,000 psi pump module
Fan: 24" diameter, 6,800 CFM, fan head oscillates 90°, 1PH,
115v, 60HZ, thermally protected TEAO motor,
3-speed pull chain
Manifold Line: 1500 psi high pressure flex line
Misting Rings: 316 Stainless. Available in Single-Stage ring with 8 Nozzles or in Two-stage stainless steel mist rings, 4 nozzles each.
Can adjust the amount of mist from using all 8 nozzles (high) down
to only 4 nozzles (low).
|
|
 |
Aquality
Stainless Steel High-Pressure Misting Lines
Aquality's high-pressure stainless steel misting lines are 3/8" ID Stainless
Steel 316SS-.049" satin shine finish. All stainless is TIG
welded. 6000 PSI minimum burst pressure. Nozzles are .008"
orifice / 10 micron atomization nozzle complete with anti-drip
check valve.
Price:
Nozzle
spacing available:
Stainless
Steel and Brass Compression Tube Fittings Available.
|
|
 |
Aquality
Flexible High-Pressure Misting Lines
Aquality's high-pressure
flex line is manufactured from 1/4" ID 3-ply ultraviolet
resistant hose. Nylon inner core has spiraled synthetic
reinforcement with polyurethane cover with bonded layers. 3000 PSI
maximum burst pressure and 1500 PSI working pressure. Nozzles are
.008" orifice / 10 micron atomization nozzles, 360 degree
adjustable orientation complete with anti-drip check valve.
Price:
Nozzle
spacing available:
Brass
Hose Fittings Available.
|
|
Single
Stage 18" 4 Nozzle Stainless Steel Mist Ring
|
Aquality
Misting Rings
Retrofitting your existing industrial fans with Aquality's misting
rings is an economical way to cool an indoor/outdoor work area.
Misting Ring Specs:
316 Stainless Steel Tubing
Misting
rings can include an optional 8 feet
of manifold line with 1/4" female fitting.
Optional Second Stage: 15" or 18" fog ring.
Mist Nozzles: .008 orifice
Manifold: 1/4" high-pressure line. Rated at 1500 PSI
Fittings: Stainless Steel / Brass
Standard
Sizes and Nozzle Configurations:
|
|
Available
in .008 or .012 inch orifice
(sold in bags of 5)
|
Brass
and Stainless Misting Nozzles - 5 Bag
-
Minimal water use—only uses 1/2
gallon of water per hour per nozzle
-
Interchangeable—screw into any 12/24
threaded mist nozzle opening
-
Available
in 10/24 and 12/24 Thread
|
|
 |
Brass Nozzle Plugs - 5
Bag
-
Use with all outdoor cooling systems
-
During the off season, replace nozzles
with plugs to keep mist line free of debris or if less mist is
desired.
|
|
|
Spun
Poly Replacement Water Filters for Misting Pumps
|
|
|
Phosphate Inlet Filter
Replacement for Aquabreeze
|
Questions
about how Mist Cooling Works? Or want to know its benefits?
Click
here to read "Mist Cooling - Frequently Asked Questions
(FAQ)" |
|
