Cooling Fans, Vests Logo

evaporative vests, ms cooling vests

 


Personal Cooling and Heating Vests


 

PC200 Phase Change Vest  (Med/Large : 100-175lbs.)

PC201 Phase Change Vest (Large/Xlarge : 175-250lbs.)

Color Choices: Royal Blue 
Fabric Choices:
Cotton,
Flame-retardant Indura, or 
Extra Flame-retardant Nomex

 

[ PC200-B ] Phase Change Cooling Vest - Cotton (M/L - Royal Blue) - $140 :

[ PC201-B ] Phase Change Cooling Vest - Cotton (L/XL - Royal Blue) - $140 :

[ PC200-I ] Phase Change Cooling Vest - Indura (M/L - Royal Blue only) - $170 :

[ PC201-I ] Phase Change Cooling Vest - Indura (L/XL - Royal Blue only) - $170 :

[ PC200-N ] Phase Change Cooling Vest - Nomex (M/L - Royal Blue only) - $200 :

[ PC201-N ] Phase Change Cooling Vest - Nomex (L/XL - Royal Blue only) - $200 :

 

 

PC300 Phase Change Vest with Hydro Pack: Med/Large (100-175lbs.)

PC301 Phase Change Vest with Hydro Pack: Large/Xlarge (175-250lbs.)


[ PC300 ] Phase Change Vest with Hydration Pack
Size (Med/Large) - $175 :

[ PC301 ] Phase Change Vest with Hydration Pack
Size (Large/XL) - $175 :


PC500
Extra Insert Phase Change Pack


[ PC500 ] Phase Change Vest ACCESSORY - Extra Set of Inserts (4) - $85 :

Aquality Deluxe Phase Change Cooling Vests

 

     Aquality brings you the Phase Change Cooling Vest Line. Ice can be uncomfortably cold when placed against the skin: water is relatively heavy and requires temperatures below 32 degrees Fahrenheit in order to solidify; once frozen, ice is rigid, collects condensation and only lasts a short period of time. Aquality has overcome these deficiencies by utilizing a powerful new cooling medium called PHASE CHANGE MATERIAL!

 


How Does it Work?
Phase Change Materials (PCM) release long lasting, temperature specific, cooling energy that can be used in a variety of applications. Our production process mechanically seals phase-change material (PCM) inside durable polyurethane plastic, creating inserts in a variety of custom configurations.  Similar to ice, the PCM 'melts' to a liquid state as it absorbs heat, but at a cooling temperature comfortably above than of freezing water (32F/0C) to ensure that the user doesn't get frostbite.  This property also allows the PCM to be recharged in icewater or other cool fluid (something that can't be done with icepacks).  In order to address a wide variety of cooling needs, we offer specific customized cooling temperatures ranging from 40F/4C up to 65F/18C to provide cool comfort for a variety of high- and extreme-heat stress applications. 
    

Phase change cooling vests are specifically designed to provide comfort and heat stress protection to personnel who wear protective clothing with minimal air circulation, such as hunting vests, HazMat Suits, Protective Coveralls, Mascot Costumes, etc. where evaporative cooling solutions would not work effectively. The performance of the PCM material is unaffected by conditions of high humidity.

 

Duration
  Phase change vests come with a single set of removable inserts, and stay at a cool 58F (14C) for up to 3 hours.  The cooling duration can be doubled up to 6 hours by placing two inserts in each pocket (this will require purchase of the optional set of spare inserts; see below).
    

Inserts recharge quickly (less than 30 minutes) in icewater, and are returned to the vest pockets for another 3 hours of cooling. If Spare inserts are used, these can be recharged quickly and swapped out for currently used inserts in an endless cycle so users can enjoy all-day, non-stop cooling action.

 

 

Weight
 When deployed with a single set of inserts, the Phase Change Cooling Vests weigh approximately 5 lbs. The weight is virtually unnoticeable, as it distributed evenly over the torso via a contoured design and snug fit.
 

Benefits:

  • Lighter than water.

  • Can be activated without electricity (simply submerge in ice water).

  • Lasts longer than ice (approx. 3 hours)

  • Delivers constant specific temperature.

  • Standard Phase change material offers a comfortable to the touch, constant 58 degrees Fahrenheit.

  • Not affected by outside temperatures or humidity.

  • Phase change packets are durable and reusable.

  • Rotate inserts every three hours to maintain continuous cooling for longer periods.

  • Cost effective way to increase comfort, enhance performance, or deliver cold therapy.

    (Volume Discounts Available)


Custom Colors: Black, Navy Blue & Tan


Aquality Personal Heating Vest

[ BHV100-N ] Battery Powered Heating Vest -
Color - Navy Blue
- $135 :

  QTY:

[ BHV100-T ] Battery Powered Heating Vest -
Color - Tan
- $135 :

  QTY:

[ BHV100-B ] Battery Powered Heating Vest -
Color - Black - $135 :

  QTY:

Aquality Battery Powered Infrared Personal Heating Vest

Price: $135.00

 

 

     Aquality is proud to introduce our new line of Battery Powered Heating Vests with 5 different power settings (see below). The vest combines an insulating washable Deluxe Fleece Vest with a set of 3 Carbon-Fiber Infrared Heating Elements to provide up to 12 hours of heated comfort in even the coldest winter conditions.  The vest is also equipped with a single bulb LED flashlight for emergency or convenience. 

 

Simply charge the Lithium-Ion battery / Temperature Controller in a standard 120V outlet with the included charger for a few hours, set the desired temperature level, and now you are ready to enjoy either work or play in complete comfort. 

 

5 TEMPERATURE SETTINGS:

                                                  

LEVEL   Temp Output       Duration
    1       86F / 30C       12 HOURS

    2      104F / 40C       10 HOURS

    3      122F / 50C        8 HOURS

    4      140F / 60C        6 HOURS

    5      158F / 70C        4 HOURS

 

 

Battery / Temperature controller unit actually displays remaining charge on the LED display using numeric digits 0-9 (0 being discharged and 9 being fully charged.

 

Excellent For:

  • SKIING / SNOWBOARDING

  • SNOWMOBILING

  • MOTORCYCLES

  • SPORTING EVENTS

  • HUNTING

  • COLD CONDITION OCCUPATIONS

  • SEARCH AND RESCUE

  • WINTER EMERGENCY KITS

  • ANYWHERE COOL TO EXTREME COLD CONDITIONS EXIST

 


Deluxe Military Phase Change / Evaporative Vest

(Front and Back views, showing Phase Change insert pockets)

[ MV100 ] Deluxe Military Phase Change/Evap Vest - $175 :
  QTY:

 

Detachable Evaporative Cooling Sleeves (one pair)

(NOTE: Vest NOT included...please order above)

[ MDS100 ] Detachable Evaporative Cooling Sleeves - $90 :
  QTY:

Phase Change Cooling Insert for MICH / Kevlar Helmet

[ MPHI ] Phase Change Helmet Insert - $18 :

 

Desert Camo Evaporative Cooling "Boonie Hat"

[ MEBH ] Camo Evaporative Boonie Hat - $30 :

 

Desert Camo Evaporative Cooling "Beanie Cap"

[ MEBC ] Camo Evaporative Cooling Beanie Cap - $12 :

Desert Camo Evaporative Neck Band

[ DENW-DC ] Deluxe Evaporative Neckwrap - Desert Camo - $12

 

ACCESSORY:
Extra set of 4 Phase Change Inserts for Military Deluxe Phase Change/Evaporative Cooling Vest.

(Allows uninterrupted cooling all day long!)

[ PC500M ] Military PC/Evap Vest ACCESSORY - Extra Set of 4 Inserts - $85 :

 

Aquality Deluxe Military Cooling Vest and Accessories


Phase Change plus Evaporative cooling
for maximum cooling power!   Great for Hunting or Military when you need the best!

 

 


Aquality is proud to introduce one of the only military/hunting cooling vests which couples both evaporative and phase change cooling technologies into one single vest.

 

It has been designed so that it allows soldiers and marines to wear their OTV directly on top of the cooling garment, which is worn over the T-shirt. This configuration is necessary to allow for the rear phase packs to be exchanged while on patrol without removing any garments or armor.  Optional detachable evaporative cooling sleeves can be purchased and attached to the vest to further boost evaporative cooling effectiveness under heavy heat stress/exercise conditions. 

 

 

PRODUCT DESCRIPTION

 The Level 1 consists of wearing the hydration vest, which soaks and retains water from an initial soaking to cool for hours/days but does not wet the underlying “T” shirt. This would likely suffice for cooling (under BDU/DCU blouse) if armor was not worn. To control the greatly increased heat stress from interceptor armor, add the phase change packs to the cooling vest’s pockets as shown in pictures, they will maintain a constant cool temperature of 58 degrees for 2+ hrs., depending on ambient temperature. These packs are relatively lightweight but made to withstand the extreme abuse of sand abrasion without leaking.
     The head cooling consists of the Level 1 hydration beanie cap, which works comparably to the vest. For additional cooling the Level 2 system for the MICH/kevlar helmet involves properly sized phase change packs, which go directly into the helmet. They are best for the MICH but work equally as well with the kevlar.
     The neck piece, consists of a DCU hydration piece. The neck guard on the interceptor limits the size of neck cooling equipment.
     This system actually exceeded our expectations when tested, based on O.I.F. experience, this represents the most effective means of controlling heat in a combat environment.

 

 

THE ULTIMATE "HEAT STRESS TEST" : 

Exercising in full gear in a 150-degree SAUNA !

     In order to simulate anticipated summer heat stress, we tested the gear in a sauna of approx. 150-170F (the thermometer broke at 140F+rising). The temperature was hot enough to make metal burn exposed skin on contact.

 

We conducted the test for 30 minutes, which included full body armor/kevlar, and physical exertion. To simulate the physical activity of soldier patrols we did push ups (in armor) and squats/knee bends. Despite the searing heat, the cooling gear was comfortable. The simulation was halted after 30 minutes in the hot sauna room due to accomplishing the simulation objective, and to prevent facial burning from the hot metal buckles/snaps on the kevlar helmet.

 

Subsequent inspection of the cooling gear revealed the phase change packs in the helmet had expended approximately 50% of their charge, while the packs in the vest still retained 75-80% of their original charge. The hydration cooling portion appeared to remain close to full charge.

 

This demonstrates that the gear will effectively cool a soldier during the intense Iraq summer, and preserve physical capabilities.  Hunters can also benefit from the extra cooling power when on-the-move after quarry.

 

 Use of recommended optional "swap-out" phase-change insert packs and cooling bags for recharging packs on the road would allow for extension of maximal cooling for prolonged periods of time, and should be considered for long missions.  We are happy to accept further testing recommendations.  


IRAQ Military Pack Offer

 

Price (as individual items)*:

  • Military Phase Change & Evaporative Vest - $175.00

  • PC500M - 4 Spare Phase Change Inserts - $85.00

  • Detachable Evaporative Cooling Sleeves - $90.00

  • Phase Change Helmet Cooling Insert - $18.00

  • Camo Evaporative Cooling Boonie Hat - $30.00

  • Camo Evaporative Cooling Beanie Cap - $12.00

  • Camo Evaporative Cooling Neck Band - $12.00

Save on the most advanced personal cooling system available today!

"Iraq Military Pack" special military-only discount*All 7 items above for $375.00* (regular price $422).

 

*Must be able to provide proof of Active Military Duty or Immediate Family of Active Military Duty Personnel to receive discounted price.

 

[ MIMP ] Iraq Military Pack (all 7 Camo cooling items above). Available to Active Military and Family only - $375 : Qty


An optional spare set of 4 phase-change inserts (see below) vastly increases your opportunity for long-term cooling:

(1) Keep a spare set of recharged inserts at hand for quick swap outs to double the length of phase-change cooling.   Both sets can be later be recharged simultaneously in ice water or refrigerator and be ready to use again. 

(2) Or, you can enjoy virtually unlimited non-stop cooling by continually rotating two sets:  use one set of inserts while quick-recharging any spent inserts in an available refrigerator, freezer, or portable supply of ice or ice-water.  (Recharging in ice water takes less than 30 minutes, and lasts for hours!)

 

 

[ PC500M ] Military PC/Evap Vest ACCESSORY - Extra Set of 4 Inserts - $85 :


 

(Volume Discounts available on all individual items.  
Volume discounts may also be applied to the Iraq Military Pack 10% discount for extra savings!)

 


EC200
Evaporative Cooling Vest - Industrial
Sizes: S,M,L,XL,XXL, Custom
Color: Royal Blue

[ EC200 ] Industrial Evaporative Cooling Vest - $39
  QTY:

 

 

EC300
Evaporative Cooling Vest - Industrial Hi Viz with Reflective Stripes

Sizes: S,M,L,XL,XXL, Custom.

Color: Royal Blue with 3M Lime/Silver Striping

[ EC300 ] Industrial Hi-Viz Evaporative Cooling Vest - $60
  QTY:

EC400
Evaporative Cooling Vest - Traffic Safety

Size: S,M,L,XL,XXL, Custom.


Color: ANSI Approved Lime w/ 3M Orange/Silver Striping

 

[ EC400 ] Traffic Safety Hi-Viz Evaporative Cooling Vest - $60
  QTY:

 

 

EC500
Evaporative Cooling Vest - Sport

Size: S,M,L,XL,XXL, Custom.

 Colors: 

 Silver, Black, Mariner Blue 

[ EC500-BLU ] Sport Evaporative Cooling Vest - Blue - $36
  QTY:

[ EC500-BLK ] Sport Evaporative Cooling Vest - Black - $36
  QTY:

[ EC500-SLV ] Sport Evaporative Cooling Vest - Silver - $36
  QTY:

Aquality Evaporative Cooling Vest Line

 

Price:

 

EC200 - Industrial Blue

EC300 - Industrial Blue Hi-Visibility

EC400 - Industrial Traffic Safety Vest

EC500 - Sports Vest

 

*Volume Discounts Available

 

     Aquality brings you our Evaporative Cooling Line of vests, combining water, polymers and Nylon. The result is a line of products that uses evaporative cooling and conductive cooling to provide hours of cooling relief in even the hottest outdoor/indoor conditions.
     Evaporative Cooling is an alternative way to combat heat stress. Aquality distributes several products that harness the cooling energy that is produced when water naturally changes from a liquid to a gas (evaporation). We have created a unique Polymer Embedded Fabric that is sewn into the garment lining. Once activated by submerging in room temperature water for 1-3 minutes, our evaporative cooling products provide hours of cooling relief. These products are a cost effective way to help you combat heat stress.

 

How does it work?  

     The Evaporative Cooling Vest utilizes and amplifies two of nature's best cooling mechanisms:

 

1. Conduction

     Conduction is the transfer of heat between materials that contact each other that are of different temperature. Heat passes from the warmer material to the cooler material. In this case, a worker's warm body will transfer heat to a cooling vest if that vest is cooler.

 

2. Evaporative Cooling

     Evaporative cooling takes place when fluids evaporate, taking with them a high level of heat energy, leaving cooler fluid molecules behind.   Water is a particularly effective evaporative cooling agent due to its high 'heat of vaporization' (heat energy absorbed to cause evaporation).   That is why we sweat to cool off...the water on the surface of our skin provides evaporative cooling on contact with air

 

The Evaporative Cooling Vest therefore takes the place of a layer of sweat is against the body by providing active cooling, while keeping the wearer dry and reducing the wearer's body water losses due to sweating.  

 

This means improved endurance outdoors during conditions of heat stress, such as hot temperatures or exercise.

 

NOTE:  In areas of very high humidity, the evaporative cooling items will experience slowed cooling effect due to slowed evaporation.  In these cases, using phase-change cooling vests and items (either in place of, or as a supplement to, evaporative cooling items) will increase the cooling effect.  

 

 

Please contact us if you have questions in selecting the best personal cooling choices for your particular climate.

 


To find out how to order other products from our website, click here.



Click here to Return to Personal Heating and Cooling Devices page

Click here to go back to Aquality's Home page.